![background image](http://html1.mh-extra.com/html/acclaim-lighting/linear-xtr/linear-xtr_user-manual_3712770009.webp)
7
www.acclaimlighting.com
FITTING AN OPTIONAL GLARE SHIELD
Optional glare shields are available, which can be fitted on either side of the fixture to help
conceal the emitters from side view.
TO INSERT A GLARE SHIELD
1 Align the glare shield (on either side of the fixture) so that its lower lip meets with the
groove running along the underside of the fixture.
2 Slide in the glare shield until it is fully inserted along the fixture.
Grooves running
along each side
Louver
FITTING AN OPTIONAL LOUVER
Optional louvers are available, which can be fitted to eliminate side spill in all directions.
Note: The option for 4’ Linear XTR fixtures consists of four 1’ louvers, which are used together.
TO FIT A LOUVER
1 Align the louver with the fixture and slide it over the emitter housing until it is fully
inserted along the fixture.
Summary of Contents for Linear XTR
