Acclaim Lighting Linear XTR, User Manual

Page: 21 / 28

19
www.acclaimlighting.com
SETTING THE CELL MODE (PERSONALITY)
The 4’ (1220mm) models offer a choice of modes that determine whether all of the emitters
act as a single 4’ cell or as four separate 1’ cells, each with their own set of DMX addresses -
see page 18.
TO SET THE CELL MODE USING THE XMT-350
1 Connect the XMT-350 to the DMX input line of the Linear XTR installation.
2 On the XMT-350, press the
MODE button, then use the arrow buttons to highlight the
RDM function and press the button to select. The XMT-350 will search for RDM devices
and after a short while the XMT-350 will display a list of all located fixtures. The fixture
highlighted in the list will flash its emitters to identify itself.
3 If necessary, use the up/down buttons to highlight an alternative fixture.
4 Press the button to view details for the chosen fixture and then use the down button
to highlight the DMX PERSONALITY entry:
5 Press the button to view the options:
6 Highlight the required cell mode:
•
For white models, choose either 1 GROUP WHITE or 4 GROUP WHITE ,
•
For dynamic white models, choose either 1 GROUP DW or 4 GROUP DW ,
•
For RGBW or RGBA models, choose either 1 GROUP RGBW or 4 GROUP RGBW .
7 Press the button to fix the highlighted choice.
8 Press the button to return to the previous screen.