10
www.acclaimlighting.com
Louver
FITTING AN OPTIONAL LOUVER
Optional 1’ louvers are available, which can be fitted to eliminate side spill in all directions.
For 4’ Linear One fixtures, use four louvers together.
TO FIT A LOUVER
1 Remove both of the end panels (see page 8).
2 Slide out both shoulder strips.
3 Slide the louver into the slots used by
the shoulder strips.
4 Refit the end panels.
Summary of Contents for Linear One DMX Exterior
Page 1: ...Linear One DMX Exterior User guide...
Page 2: ......
Page 27: ......
Page 28: ...www acclaimlighting com...
