Acclaim Lighting Dyna Accent, User Manual

Page: 7 / 24

5
www.acclaimlighting.com
PAN AND TILT ADJUSTMENT
To prevent any movement once set, the tilt adjustment uses interlocking teeth. This means
that you need to slacken the hex bolt completely before the teeth will disengage and allow
movement. A 5mm Allen wrench (hex key) is supplied with the fixture for adjusting the tilt
angle. A 2mm Allen wrench (not supplied) is required to adjust the pan angle using the two
small grub screws in the base.
5mm Allen
wrench
(supplied)
Tilt adjustment bolt
2mm Allen wrench
(not supplied)
Recessed pan
adjustment
screw x2
The tilt angle of the Dyna Accent head is adjustable through a range of nearly 180 degrees.
See next page .