Acclaim Lighting Dyna Accent, User Manual

Page: 4 / 24

2
www.acclaimlighting.com
INTRODUCTION
WELCOME
Welcome to the Dyna Accent range from Acclaim Lighting. These rugged LED-powered
fixtures are designed to replace traditional external flood lights while using a fraction of the
power. Featuring a die-cast aluminum body throughout with full IP66 environmental rating,
these fixtures are built to last. A choice of standard gray, black or white finishes plus special-
order custom colors are available.
The Dyna Accent range consists of four main variants:
•
Fixed white - 2700K, 3000K, 3500K or 4000K emitters,
•
DW (Dynamic White) - Warm and cool white emitters (2400K to 5500K),
•
RGBW - Red, green, blue and cool white LED emitters,
•
RGBA - Red, green, blue and amber LED emitters.
External control using the industry standard DMX-512A is supported via either cable or the
in-built Aria™ wireless receiver. The industry standard RDM
(Remote Device Management)
format is used for configuration. Dyna Accent features automated operation when light
levels fall below a certain level together with a timer for auto shut off.
The internal auto-sensing power supply can accept mains inputs between 100 to 277VAC at
50 or 60Hz. Total power consumption is just 35W.
Optional spread lenses and snoots are available.
SAFETY
•
When fixtures are mounted off-ground, ensure that they are securely fitted to an
appropriate mounting surface.
•
Ensure that the power input is supplied from a correctly fused, earthed and
environmentally protected location.