Acclaim Lighting aria Dyna Accent, User Manual, Page: 23 / 42

21
www.acclaimlighting.com
SETTING THE DMX ADDRESS
When external control (wired or wireless) is used, the DMX start address of the fixture needs
to match the start address being used by the controlling device. Color fixtures use four DMX
channels (for Red, Green, Blue and White), beginning with the one chosen here; white-only
models require just one DMX channel.
Notes:
•
The DMX address can also be configured via RDM, see page 29.
•
The DMX address is completely independent of the Aria wireless radio channel setting.
•
When a valid DMX input is attached to the Dyna Accent fixture it will override any internal color
output.
TO SET THE DMX ADDRESS
1 Enter the user menu (see page 19).
2 Press
ENTER
to choose the
DMX Address
menu item.
3 Use the and buttons to choose a start address from 1 to 509 (512 on white-only
models).
4 Press ENTER to save. The DMX start address is now fixed.
RETURNING TO FACTORY SETTINGS
This option returns the fixture to its default settings. The DMX address will be reset to 1.
TO RETURN TO FACTORY SETTINGS
1 Enter the user menu (see page 19).
2 Use the button to locate the
Factory Setting
option and press ENTER . The display will
show
Reset to Factory Defaults
.
3 Press ENTER . The display will show
Are you sure?
4 Use the button to show
Yes
and press ENTER .
VIEWING FIXTURE INFORMATION
This option contains four useful information read-outs:
• LED Temperature
- shows the current temperature measured at the centre of the LED
emitter face. See page 23 for details about changing the temperature read-out units
between
O
F and
O
C, and also about enabling over-temperature warnings.
•
Firmware Version
- displays the software versions for both the boot loader and the main
application.
• LED Usage
- displays the total number of hours that the LED emitters have been raised
above 0% output.
• Fixture Usage
- displays the total number of hours that the fixture has been powered on.
Note: All of these items are for information only, no changes are possible.
TO VIEW FIXTURE INFORMATION
1 Enter the user menu (see page 19).
2 Use the or buttons to locate the
Fixture Information
option and press
ENTER
.
3 Use the or buttons to locate the required read-out and press ENTER .