Access Virus Rack XL User Manual Download Page 177 | Manualshive

Page: 177 / 194

background image

ACCESS VIRUS RACK XL OS5

177

Classes

PDF VERSION - RESTRICTIONS APPLY

CLASSES

P: PERFORMANCE CONTROLLER

Accessible by Control message. Performance
Controllers are not stored with a Single-Sound.
If more than one Multi Part is set to the same
MIDI channel, all Parts on this MIDI channel re-
ceive the same Performance Controllers.

A: SOUND PARAMETER OF BANK A

Accessible by Control message, SysEx-Param-
eterchange and Single-Dump.The Sound Pa-
rameters are stored with a Single Sound. When
received as Control Message, the Sound Pa-
rameter is received only by the Multi Part with
the lowest part number, if more than one Multi
Part is set to the same MIDI channel. When re-
ceived as SysEx-Parameterchange or Single-
Dump, the part is addressed by the part
number irrespective of the actual MIDI channel
setting.

B: SOUND PARAMETER OF BANK B

Accessible by MIDI Polyphonic Pressure,
SysEx-Parameterchange and Single-Dump.The
Sound Parameters are stored with a Single
Sound. When received as Polyphonic Pressure,
the Sound Parameter is received only by the
Multi Part with the lowest part number, if more
than one Multi Part is set to the same MIDI
channel. When received as SysEx-Parameter-
change or Single-Dump, the part is addressed
by the part number irrespective of the actual
MIDI channel setting.

M: MULTI PARAMETER

Accessible by SysEx-Parameterchange and
Multi-Dump The Multi Parameters are stored
with a Multi Patch.

MS: MULTI/SINGLE PARAMETER

When in Single Mode, the parameter is received
and stored with the Single Sound.When in Multi
Mode, the parameter is received and stored
with the Multi Patch. In Multi Mode the Single
Sound settings are ignored while the corre-
sponding Multi Patch settings are active.

NP: NON-PART-SENSITIVE SOUND
PARAMETER

When in Multi Mode, the parameter affects all
Multi Parts.

BPC: BANK/PROGRAM-CHANGE
PARAMETER BANK SELECT

Selects the Single bank accessed by a subse-
quent Program Change, similar to the regular
Bank Select.Bank Change directly changes the
Single program to the requested bank, without
c h a n g i n g t h e p r o g r a m n u m b e r. P ro g r a m
Change directly changes the Single program to
the requested program number, without chang-
ing the bank number; similar to the regular Pro-
gram Change. Part number $40 will address the
Single buffer in Single Mode.

G: GLOBAL PARAMETER

The Global Parameters are independent of Sin-
gle Sounds or Multi Patches and non-part sen-
sitive.

«
...
175
176
177
178
179
...
»

Summary of Contents for Virus Rack XL



































































































































































































Reviews:

No comments

Related manuals for Virus Rack XL

Brand: E-Mu Pages: 10

Brand: Oberheim Pages: 23

Brand: Sequential Pages: 120

Brand: Kawai Pages: 58

Brand: Cruse Pages: 21

WARNA 1983 VOLTAGE DISTRIBUTOR II

Brand: Xaoc Devices Pages: 4

DaySequerra Mono2Stereo

Brand: DTS Pages: 20

Brand: Behringer Pages: 43

Brand: Moog Pages: 82

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands