Access Virus Rack XL, User Manual

Page: 110 / 194

110
CHAPTER 7
The Parameters
Arpg&Ctrl Section
(menu)
ARPEGGIATOR
CLOCK
This parameter determines the basic tempo of
the Arpeggiator in reference to the clock gener-
ator. The standard setting is 1/8 and normally
doesn’t need to be changed. The actual tempo
is determined by the global clock generator, the
speed of which may be varied via CLOCK TEM-
PO (see the section on CLOCK TEMPO). More-
over, the clock generator can be synced up to
the external MIDI Clock.
A value of 1/4 halves the speed of the Arpeggia-
tor; 1/16 doubles it. The other CLOCK positions
yield fairly exotic time signatures in reference to
the clock generator’s tempo.
01111111111111111112
1 Arpeggiator
Clock 1/16≤
61111111111111111154
SWING
This parameter controls the "swing factor" of
the rhythm patterns. Higher SWING values de-
lay the even-meter or straight sixteenths; that
is, every second sixteenth note. This lends the
rhythm a swing feel.
When SWING is set to the lowest value (50%),
the interval between the individual sixteenth
beats is identical and the length of an eighth
note is divided into two identical beats; in other
words, the rhythm is "binary".
At 66%, the rhythm is "ternary", the length of a
eighth note is divided by a factor of 2:1.
At the highest value, 75%, the eighth note is di-
vided by a factor of 3:1. The odd sixteenth no-
tes are lengthened to a dotted sixteenth note,
the even sixteenth notes are shortened to the
length of a 32nd note.
01111111111111111112
1 ARPEGGIATOR
Swing 50.0%≤
61111111111111111154
within the list, you’ll find landmarks, such as
16A-16F, known from Emagic’s Logic Audio se-
ries.
Every arpeggiator pattern contains note
velocity information which enhance the rhythmi-
cal meaning of the pattern. The arpeggiator
velocity completely substitutes the note veloci-
ty. In case, you are in need to assign the velocity
to a certain parameter, simply use the Modulati-
on Matrix.