Manual PCI-DA12-2/4/6
9
Chapter 2: Installation
The software provided with this board is available by request on CD for a fee, or
downloaded via the product page for free and must be installed onto your hard disk prior
to use.
Installing from Downloaded Installer
Windows
1.
Visit the product web page at http://acces.io/cardname
2.
Download the Software Package from the Downloads tab
3.
Run the Install program and follow the on-screen prompts to install the software
for this board
Linux
1.
Please visit http://github.com/accesio for information on installing under Linux.
Installing from CD
Perform the following steps as appropriate for your operating system. Substitute the
appropriate drive letter for your drive where you see D: in the examples below.
Windows
1.
Place the CD into your CD-ROM drive.
2.
The system should automatically run the install program. If the install program
does not run promptly, click START | RUN and type d:install, click OK or press K.
3.
Follow the on-screen prompts to install the software for this board.
Caution! * ESD
A single static discharge can damage your card and cause
premature failure! Please follow all reasonable precautions to
prevent a static discharge such as grounding yourself by
touching any grounded surface
prior to touching the card.
