Assembly Instructions / Turbochargers A131-R, A136-R
2 Safety / 2.1 Introduction
© Copyright 2023 Turbo Systems Switzerland Ltd. All rights reserved.
HZTL455311P0044_EN
Rev. A
April 2023
2
Safety
2.1
Introduction
State of the art
Turbochargers manufactured by Accelleron are state of the art and comply with the respective
health and safety standards in effect at the time the turbocharger was built. This ensures safe opera-
tion of the turbocharger.
CE conformity information
Accelleron turbochargers comply with Machinery Directive 2006/42/EC and are partly completed ma-
chinery as defined by Article 2 g.
Residual risks
Nevertheless, there may be some residual risks during operation of and work on the turbocharger
which:
¡
are caused by the turbocharger itself or its accessories.
¡
are caused by the operating equipment used or supplies and materials.
¡
are a consequence of insufficient compliance with safety instructions.
All of the instructions contained within this chapter must be followed when working on the turbochar-
ger.
Responsibility of the operating company
In awareness of its responsibility, the operating company must ensure that only authorised personnel
work on the turbocharger, who:
¡
Correspond to the target group (see
).
¡
Are versed in the general and locally applicable regulations for occupational safety and accident
prevention
¡
Are equipped with the prescribed personal protective equipment
¡
Have been instructed in the use of the turbocharger.
The safety-conscious work of the personnel and adherence to the assembly instructions must be
checked periodically.
Suitable working materials and personal protective equipment must be kept in a perfect condition.
Page
5
/
17
Summary of Contents for Turbocharger A131-R
Page 2: ......
