Assembly Instructions / Turbochargers A131-R, A136-R
1 Introduction / 1.1 Purpose of the assembly instructions
© Copyright 2023 Turbo Systems Switzerland Ltd. All rights reserved.
HZTL455311P0044_EN
Rev. A
April 2023
1
Introduction
1.1
Purpose of the assembly instructions
The assembly instructions explain how the Accelleron turbocharger is fitted to the engine correctly
and without any health and safety risks. This element of the documentation is supplied with the
product, as is required for partly completed machinery in accordance with Machinery Directive
2006/42/EC.
The assembly instructions are a complement to and expansion of existing national regulations for oc-
cupational safety, accident prevention and environmental protection.
1.2
Definition of target group
The assembly instructions are intended for engineers and mechanics responsible for fitting the tur-
bocharger on the engine. Basic mechanical training is a prerequisite.
All persons who are involved in the transportation and installation of the turbocharger have read and
understood the assembly instructions.
1.3
Symbols, definitions
Symbols
The following symbols are used in this document:
u
Indicates an action step.
1.
Indicates a numbered action step.
¡
Indicates a list.
[→ ] Refers to a page number
The trademarks of outside companies are used in this document. These are marked with the ® sym-
bol.
Design variants
This document is valid for different design variants of turbochargers. There may be sections and de-
scriptions of components that are not relevant for a specific turbocharger variant.
Accelleron service stations will be happy to provide information about questions regarding a design
variant (see "Contact Information" on the website
).
Accuracy of illustrations
The illustrations in this document are general in nature and intended for ease of understanding. Dif-
ferences in detail are therefore possible.
Page
2
/
17
Summary of Contents for Turbocharger A131-R
Page 2: ......
