Assembly Instructions / Turbocharger A100-H
5 Storage of new turbochargers and spare parts /
© Copyright 2023 Turbo Systems Switzerland Ltd. All rights reserved.
HZTL455311P0004_EN
Rev. D
March 2023
5
Storage of new turbochargers and
spare parts
Storage of new turbochargers and spare parts up to 6 months
New turbochargers and spare parts can be stored in their closed packages and for 6 months from
the date of delivery without additional mothballing measures.
Only dry rooms in which the relative humidity is between 40…70 % and no condensation can form are
suitable for storage.
Storage of new turbochargers and spare parts for more than 6 months
As the contents of the package are adapted as required, turbochargers may also be delivered
without a VCI label.
For parts with a VCI label on the package, the following instructions must be observed.
Fig. 12: Volatile Corrosion Inhibitor (VCI)
WARNING
Health protection when handling VCI
VCI products are not hazardous in terms of the Ordinance on Hazardous Sub-
stances. Nevertheless, the following points must be observed when handling VCI:
u
Observe the information in the material safety data sheet.
u
Ensure good room ventilation.
u
Do not eat, drink or store food at the workplace while working with VCI.
u
Clean your hands and face after working with VCI.
u
For further information refer to
Wear safety gloves to protect against mechanical hazards.
Every 6 months, the following corrosion protection measures must be carried out:
u
Open the package.
u
Remove the VCI corrosion protection emitter from the package and replace it with a new, identical
VCI corrosion protection emitter. New VCI corrosion protection emitters can be obtained at
.
u
Dispose of the old VCI corrosion protection emitter in an environmentally compatible manner, pro-
fessionally and in accordance with local regulations.
u
Close the package. The more tightly the package is sealed, the longer the corrosion protection
will last.
Page
17
/
21
Summary of Contents for A100-H Series
Page 2: ......
