Acadia Hearth AH2613i, Manual

Page: 7 / 80

7
SAFETY LABEL
FOR YOUR SAFETY READ BEFORE OPERATING
WARNING: If you do not follow these instructions exactly, a fire or explosion may result causing property
damage, personal injury, or loss of life.
A. This appliance is equipped with an ignition device that automatically
lights the pilot. Do not try to light the pilot by hand.
B. BEFORE OPERATING, smell around the appliance area for gas. Be
sure to smell next to the floor because some gas is heavier than air and
will settle on the floor.
WHAT TO DO IF YOU SMELL GAS
Do not try to light any appliance.
Do not touch any electric switch; do not use any phone in your
building.
Immediately call your gas supplier from a neighbor's phone.
Follow the gas supplier's instructions.
If you cannot reach your gas supplier, call the fire department.
C. Use only your hand to turn the gas control manual valve. Never use
tools. If the valve will not turn by hand, do not try to repair it; call a
qualified service technician. Force or attempted repair may result in a
fire or explosion.
D. Do not use this appliance if any part has been under water.
Immediately call a qualified service technician inspect the appliance
and to replace any part of the control system and any gas control that
has been under water.
1. STOP! Read the safety information above on this label.
2. Press the wireless remote OFF button.
3. Turn off all electric power to the appliance.
4. This appliance is equipped with an ignition device which automatically
lights the pilot. Do not try to light the pilot by hand.
5. Locate the manual valve installed by your qualified service technician.
6. Turn the manual valve clockwise to the OFF position.
7. Wait five (5) minutes to clear out any gas. Then, smell for gas, including
near the floor. If you smell gas, STOP! Follow "B" in the safety
information above. If you do not smell gas, go to the next step.
8. Turn the manual valve counterclockwise to the ON position.
9. Turn on all electric power to the appliance.
10. Press the wireless remote ON button.
11. If the appliance will not operate, follow the instructions, "The Turn Off
Gas To Appliance" and call your service technician or gas supplier.
1. Press the wireless remote OFF button.
2. Turn off all electric power to the appliance if service is to be
performed.
3. Locate the manual valve installed by your qualified service
technician.
4. Turn the manual valve clockwise to OFF position.
OPERATING INSTRUCTIONS
TO TURN OFF GAS TO APPLIANCE
ON
OFF
ON/OFF
853070



 − 






!
When this fireplace is initially lit, condensation will appear on the glass. This is normal in all gas fireplaces and will
disappear after several minutes. A paint smell will occur during the first few hours of burning. It is recommended to
leave the fan off during this period to help speed the paint curing process. This fireplace may produce noises of
varying degree as it heats and cools due to metal expansion and contraction. This is normal, and does not affect
the performance or longevity of the fireplace.
This image is only an example. The label on the actual unit will vary slightly.
OVERVIEW