22
If burner and/or pilot have been burning, use appropriate protection to avoid burns or damage to personal property
before removing any components. DO NOT OPERATE THIS APPLIANCE WITHOUT THE SEALING GASKET (LOCATED UNDER THE
CONTROL BOARD) IN PLACE. IF GASKETING IS DAMAGED, IT MUST BE REPLACED.
Check all connections for leaks with soapy water, whether field or factory made.
CONTROL BOARD
ELECTRICAL INFORMATION
Do not use this fireplace if any part has been under water. Immediately call a qualified service technician to inspect this
appliance and to replace any part of the control system and any gas control which has been under water.
Electrical Grounding Instructions: This appliance is equipped with a three-prong (grounding) plug for your protection
against shock hazard and should be plugged directly into a properly grounded three-prong receptacle. Do not cut or
remove the grounding prong from this plug.
Electrical Grounding Instructions
This appliance is equipped with a three-prong (grounding) plug for your protection against shock hazard and should be
plugged directly into a properly grounded three-prong receptacle. Do not cut or remove the grounding prong from this plug.
Wiring Requirements
• The IFC System Module requires 120V of electricity and/or batteries to operate.
• Using the battery back-up will operate the burner only.
• Light and blower components will not function on battery back up power.
INSTALLATION
