AC S.A. all rights reserved. Under penalty of law and/or liability claims it is forbidden to copy, publish, distribute, make available and/or use in any way all or any part of information contained
within this document, in particular photographs, drawings, illustrations, trademarks, etc
44
Fig. 37 3D map view
The 3D view is a spatial display of the two-dimensional map. You can rotate the 3D map dragging it
with the right mouse button. Other editing operations may be performed identically as in the 2D map.
2.11. Petrol portion map
The “Petrol portion” tab offers configuration of the petrol post-injection with simultaneous gas
injector control. Configuration of petrol post-injection is made on a two-dimensional map with an RPM
and petrol injection time axes. Like on the RPM correction map, the cursor shows the engine operation
curve point. Navigation on the petrol portion map is identical as on the RPM correction map, i.e. cursor
keys (← ,↑,→, ↓), SHIFT and CTRL keys can be used to select map areas and modify their values.
Fig. 38 Petrol portion map
Map values specify the percentage of petrol while running on gas in a given operating curve point. The
actual petrol post-injection time is based on the map values related to the petrol injection time in a
given operating curve point. Example: 20% for the 10ms column means 2ms petrol extra-injection.
After modification of the petrol portion map, verify if the mixture is correct in areas
allowing petrol extra-injection.