ABX Pentra 80 RAB108EA, User Manual

Page: 122 / 306

Pentra 80
4–30
Pentra 80 - User Manual - RAB108EA
5.3.1. Normal and panic ranges
« h » indicates that the result is above the normal limit set by the user.
« l » indicates that the result is below the normal limit set by the user.
« H » indicates that the result is above the panic limit set by the user.
« L » indicates that the result is below the panic limit set by the user.
These flags can also be criteria for the pathology messages.
5.3.2. Results exceeding Linear ranges of the instrument
Different alarms can be activated if a parameter results exceeds exceeds the Linear limit of
the instrument:
◆ Result may be forced to 0,
◆ Parameter value displayed with «D» (Dilution)
◆ Parameter value may be replaced with «---D»
Tab. 4–5: Results exceeding linear ranges
* The instrument must have been configured by an ABX DIAGNOSTICS approved technician
Parameters Conditions Consequences
WBC
<0,1x10
3
/mm
3
and RBC<0,01x10
6
/mm
3
>120x10
3
/mm
3
>150X10
3
/mm
3
WBC forced to 0
WBC replaced by «--- D»
diff# results replaced by «---»
RBC
<0,01x10
6
/mm
3
>8x10
6
/mm
3
>18x10
6
/mm
3
RBC replaced by «---»
RBC value + D
RBC replaced by «--- D»
HGB
<0,1g/dL
>24g/dL HGB forced to 0
HGB replaced by «--- D»
HCT
<0,7%
>67% HCT forced to 0
HCT replaced by «--- D»
PLT
if SCL flag
<5.0x10
3
/mm
3
>1900x10
3
/mm
3
PLT reported to «---»
No PLT histogram
MPV, Pct, PDW reported to «---»
No SCL flag occurs
PLT replaced by «--- D»
PLT
(Platelet
Concentrate
mode *)
if SCL flag
<5.0x10
3
/mm
3
>1900x10
3
/mm
3
>5000x10
3
/mm
3
PLT reported to «---»
No PLT histogram
MPV, Pct, PDW reported to «---»
No SCL flag occurs
PLT value + D
PLT replaced by «--- D»