PTZ control
PTZ control
General information
PTZ control is used to access individual PTZ cameras
and control them manually.
Using the PTZ control panel
No. Meaning/function
1
Iris
2
Focus
3
Zoom
4
Controls camera and starts patrol 1
Pop-up menu for mouse operation
Note
Press the right mouse button when the cursor is
positioned on a live image.
The following settings can be made. The arrow pointing
to the right indicates that a sub-menu is opened for
selection:
Channel
PTZ camera selection
Preset
Selects the set preset
Exit
Exits PTZ mode
PTZ settings
The following settings are necessary on the PTZ
cameras:
1. Select the installed camera.
2. Enter the data of the connected camera. Ensure that
the data matches that of the PTZ camera.
3. The PTZ ID is used to clearly identify and control the
PTZ camera.
4. If several cameras of the same type are connected,
then you can copy the settings to the other connec-
tions.
5. Exit the settings by pressing Apply and OK.
Note
Check the settings of the PTZ cameras.
If a connected camera does not work correctly,
then check the entered parameters (ID, baud rate,
data bit etc.).
1
2
3
4
20
