Abus TVAC26030, Installation Instructions Manual

Page: 34 / 45

11
4.3 Control options and operation
4.3.1 Keyboard
Connect the control panel via network to an IP camera/IP dome.
DEV: 0 WALL: 1
MON: 0 [ ]
CAM: 0
Example: 1: Add a camera via web interface
2: Go to the "Keyboard" menu on the control panel
3: Enter the ID of the added one on the control panel and then click CAM
Function Description
DEV /
MON /
CAM Here you must enter the assigned ID of the
camera. This ID is assigned automatically and
can be read out in the web interface of the
keyboard.
Here an IP Dome with the ID 1 was added
CAM:1
Control layout PTZ dome / camera
Preset Call up your previously set presets by pressing
a
number and then the Preset button
Patrol Recall your previously set Patrol by pressing a
number and then the Patrol button
Zoom You can use the zoom by turning the joystick
or with the Zoom+/Zoom- buttons
Focus You can adjust the focus using the
Focus+/Focus- buttons
Switch quickly between cameras You can switch between the input channels
with the
PREV/NEXT buttons