Abus TVAC26030, Installation Instructions Manual

Page: 33 / 45

10
4.2 Description of the local menu
System
Version Shows the firmware and panel version
Network Here you can switch DHCP on/off. If DHCP is
off you can assign an IP address and a
gateway. Default: "on"
User Here you can create different users
serial port Here you can edit the serial port settings
RS-485 Here you can make user-defined settings for
each address bit (camera ID) e.g: Build Rate,
Data Bit, Stop Bit, Party, Protocol
Hardware Various settings
Time Here you can set the system time of the control
panel
Maintenance Here you can update the control panel, import
or export settings, and reset everything to
factory settings
Upgrade Here you can perform an update via the USB
port
Import Here you can import settings via the USB port
Export Here you can export your settings
Defaut Here you can reset the control panel to factory
settings