ABUS Z-Wave Gateway SHGW10000 Quickguide
FAQ
What should I do if I have forgotten my
password?
During operation, press the reset button on
the back of the device for five seconds. The
gateway then restores the standard admin
access and standard network configuration
(DHCP).
How do I exclude a device from the
component list if it is defective or lost?
If your device can no longer establish a
connection to the gateway, it can be
removed from the gateway by pressing the
following ICON:
Note: If a device does not respond for more
than 24 hours, the
symbol appears
Why my device cannot be included?
1.
Make sure that your Z-Wave gateway
and the device communicate on the
same frequency.
2.
Your device may already be
connected to another Z-Wave
network, so try an exclusion first.
3.
The battery of the device is empty.
What is the default admin login?
Standard admin user: admin
Standard admin password: _____ (empty)
Scope of delivery
Gateway
ID / Password Card
Quickguide
Ethernet Cable
Power Supply 5V / 1,5A
(DC-Stecker:
3,5 x 1,35mm)
Product description
1
Z-Wave LED-Indicator
2
Netzwerk LED-Indicator
3
Status LED-Indicator
4
Reset-Button
5
Power Supply (5V DC / 1A)
6
LAN-interface
7
Speaker
Reset – Factory Default
To completely reset your Z-Wave Gateway to factory
settings, connect to the device using the ABUS Z-
Wave One App. Open the configuration and select the
option "Z-Wave Factory Settings" in the admin area.
If this controller is the primary controller for your
network, resetting it will result in the nodes in your
network being orphaned and it will be necessary
after the reset to exclude and re-include all of the
nodes in the network. If this controller is being used
as a secondary controller in the network, use this
procedure to reset this controller only in the event
that the network primary controller is missing or
otherwise inoperable.
