52
1.
First, set up the second device on the network and configure all basic
functions (date, memory drives etc.).
2.
In the “Hot spare” menu, select the hot spare mode for this device. You will
need to restart the recorder in order to do this. Follow the instructions.
3.
Make a note of the IP address for the hot spare device.
4.
Switch to the “Hot spare” menu in your primary recorder as well, select the
“Normal mode” option and enable the function.
5.
Enter the IP address and password for the hot spare device.
6.
A permanent connection is now established between the primary device and
the hot spare device.
7.
Setup is now complete.
To apply the settings, confirm your selections by clicking on “Apply”.
Note
When hot spare mode is enabled, the usability of the recorder is limited. Only basic
configurations are available in the settings menu.
10)
Maintenance settings
In this menu you can import and export e.g. important status information and
configuration data and reset the recorder to the default settings.
System info
v
This menu displays various information on the system, cameras, recording, alarms,
the network and storage media.
