Abus FUMO50110, Installation Instructions And User Manual, Page: 82 / 267

Functions and displays
82 | EN
Functions and displays
Software version displayed by LEDs
The software version of the hybrid model is indicated by the LEDs immediately after the power
supply is connected.
Note
You can also find the software version in the alarm panel's info menu.
Installer mode -> Info -> Hybrid module
User menu -> Info -> Hybrid module
•
The red left-hand TX LED indicates the major software version.
•
The red right-hand TEST LED indicates the minor software version.
Example:
Red left TX LED flashes once
Red right TEST LED flashes once
Software version “1.1”
•
The red left-hand TX LED then flashes a few times in quick succession. If the red TX LED is
flashing, the hybrid module is transmitting.
“Hybrid module is transmitting” displayed by LEDs
Every time the hybrid module transmits, the red left-hand TX LED flashes.
Test displayed by LED
The TEST LED is only used for factory testing.