Abus FUMO50110, Installation Instructions And User Manual, Page: 74 / 267

Installation
74 | EN
Loudspeaker connection
Image 11
You can only connect a loudspeaker with an impedance of >= 16 ohms at this terminal.
Danger
Loudspeakers are not sounders or output devices of intrusion and hold up alarms as
described in EN50131-4.
However, loudspeakers can emit alarm tones. Loudspeakers also emit warning tones
and other alert tones e.g. when arming and disarming the alarm system.
Note
You can set the volume of the different signal tones on the loudspeaker in the user
menu.
User menu -> Configuration -> Volume settings ->
Operator tones 0-10
Info tones 0-10
Alarm tones 0-10
Note
These volume settings affect the volume at the alarm panel, all internal sounders
(FUSG50110)
and the loudspeaker reproduction at the hybrid module.