Abus FUMO50110, Installation Instructions And User Manual, Page: 56 / 267

Functional principle and features
56 | EN
Functional principle and features
General
The hybrid module is an additional component for use with Secvest alarm panel FUAA50xxx.
The hybrid module communicates with the Secvest alarm panel wirelessly.
The hybrid module is used to connect wired detectors. These are additional alarm panel zones.
In addition, components can be connected to the relay outputs and switched. These are additional
alarm panel outputs.
A connected loudspeaker can emit beep tones in addition to the alarm panel and other sounders.
The hybrid module is operated using an external power supply.
The hybrid module is designed for wall installation.
The hybrid module is protected against opening and wall tampering contact via a housing tamper
switch and a wall tamper switch. The tamper information is transmitted to the alarm panel.
Main features
Simple installation Hinged lid for easy installation
Shock-resistant construction from polycarbonate Housing and wall tamper contact
2 per alarm panel Input and output voltage monitoring
500 m range outdoors Inputs for external power supply faults
Repeatable Tamper input for sounder
10 or 5 zones 4 voltage outputs
4 relay outputs Jamming detection