Abus AZWG10200, Manual, Page: 26 / 40

AUX lines (two digital inputs, high/low)
The two digital inputs of the AZWG10200-PSTN/IP CONVERTER can be
used for the tamper contact, for example.
 wiring, input type; the following options are available in the
menu:
o
Not active: input is switched off
o
Normally Open: input is normally open, operating
current (NO)
o
Normally Closed: input is normally closed, standby
current (NC)
 Delay in hours, minutes and seconds. If the input resets
back to normal state within the set delay time, no
notification is issued.
 Sequence: notifications are sent as per the sequence set in
the 'Notifications' tab. There is a special sequence in the
upload/download menu for enabling the upload/download
connection.
 Alarm: as soon as the input is enabled. There is a special
sequence under 'Start up/download panel' for enabling the
upload/download connection.
 Reset: as soon as the input is reset to normal state. If 'NO'
is selected, this notification is not sent.
 Area: sub-area of the notification.
 Text: free text field with 16 characters. This text is sent
when the inputs go into 'Alarm' and 'Reset' states. Use only
characters A to Z, 0 to 9 and do not use bookmarks or
international characters.