Abus AZWG10200, Manual, Page: 20 / 40

'Modules' tab
The settings for the GSM, Ethernet (LAN), converter and time server hardware
modules are configured in the 'Modules' tab.
GSM module
ON
 GSM module enabled for transmission
 GPRS enabled for IP transmission
 APN: provider access point
 User name: GPRS (2G) provider login
 Password: GPRS (2G) provider login
 PIN code: used if there is a PIN on the SIM card
Ethernet/LAN module
The Ethernet module is the LAN port on the PCB and allows for transmission
via Ethernet.
ON
 Ethernet/LAN module enabled for transmission and remote
access
 Obtain IP address automatically (DHCP)
 If this option is ticked, the AZWG10200-PSTN/IP
CONVERTER automatically obtains the network settings
via DHCP
Ethernet/LAN
 Enter the desired data for a fixed IP address, gateway
and subnet mask. (If these fields are greyed out, the tick
mark for 'Obtain IP address automatically (DHCP)' must
be removed.)
Smart IP configuration active
 If DHCP is not enabled, the 'Smart IP configuration
active' option can be ticked. Then if the entered data