10
4650-60 Issue 01
5.3 Recording Data
The Abtus Gauge Interface 2 software provides a versatile framework in which to
record and analyse data. This section will only describe the steps necessary to
start a recording.
The user can choose from Three options.
Profile: Record a profile.
Profile series: Record a series of profiles. The user sets the chainage
distance (start distance point) and the increment distance between each
recording. The same profile is recorded at a series of positions separated
by the same interval. Each new profile is saved in a separate file with the
file name automatically appended with the distance at which that profile
was recorded from the first profile.
Single points: Record a set of single points.
If the user chooses Profile, Profile series or Single points, the next window is
common to all three options. The user is able to fill in fields for ‘File name’,
‘Description’, ‘User name’ and ‘Track code/location’. The only mandatory field is
‘File name’. You can store and use later predefined fields right to each field.