24
11.0
Viewing a Recording
Step 1: View Cyclic Top Faults for a specific wavelength
- Click the ‘
View a recording
’ button at the bottom of the screen.
- In the ‘
Choose what to display
’ options at the top of the screen select ‘
Cycles
’.
- The top right of the screen shows a list of recordings saved on the Windows device.
- Select the
rail
and
wavelength
of the cyclic top fault to analyse.
- Click ‘
Plot
’. For example if the measuring train report has found an 18 m cyclic top fault on the
right rail, then select those options.
Figure 23 - View a Recording
