How to Specify
Type
F16AD
range - options
Standard housing
F16ADBL
range - options
Standard housing,
backlit display
F16ADN
range - options
NEMA 4X housing
F16ADNBL
range - options
NEMA 4X housing,
backlit display
Cecomp
®
Low-Voltage Powered Digital Pressure Gauges with Selectable Units
F16AD, F16ADN
Ranges and Resolution
See table below. Select range and default engineering units.
Units may be changed to any listed under the same sensor range
Resolution is fixed and limited to available display digits
Accuracy
Accuracy includes linearity, hysteresis, repeatability
Standard accuracy: ±0.25% of full scale ±1 least significant digit
HA
accuracy option: ±0.1% FS ±1 LSD, see ranges for availability
Sensor hysteresis: ±0.015% FS, included in accuracy
Sensor repeatability: ±0.01% FS, included in accuracy
Display
3 readings per second nominal display update rate
4 digit LCD, 0.5" H and 5 character 0.25" H alphanumeric
BL
: Red LED backlight on when gauge is on
Power
8-24 VAC 50/60 Hz or 9-32 VDC
AD
:
Approximately 5 mA
ADBL
:
Approximately 80 mA
3 ft long, 2-conductor 22 AWG cable
All models are designed for continuous operation
Order optional WMPSK 115V/12 VDC wall mount power supply kit.
Controls and Functions
Front button turns gauge on or off, zeros gauge reference gauges,
and cycles through min./max. functions
Internal buttons for pass code protected unit selection, min./max.
setup, calibration.
Min/Max Functions
Minimum and maximum readings stored 3 times per second
Front button cycles through min. display, max. display, clear
Configurable for min. only, max. only, min./max., or none
Configure to clear or retain min/max values at power off
O
±0.25% Test Gauge Accuracy
O
316 Stainless Steel Wetted Parts
O
Minimum, Maximum, Zero Functions
O
Selectable Units
O
Low Voltage Powered
Calibration
Pass code protected calibration
Non-interactive zero, span, and linearity, ±10% of range
Weight
Gauge: 9 ounces (approximately)
Shipping: 1 pound (approximately)
Housing
F16AD
: Extruded aluminum case, epoxy powder coated, ABS/
polycarbonate bezel (aluminum bezel optional), front and rear
gaskets, polycarbonate label
F16ADN
: ABS/polycarbonate NEMA 4X case, rear gasket, polycar-
bonate label
Connection and Material
1/4" NPT male fitting, 316L stainless steel
All wetted parts are 316L stainless steel
Overpressure, Burst, Vacuum
Ranges using 3000 psig sensor: 5000 psig
Ranges using 5000 psig sensor: 7500 psig
All others:
2 X pressure range
3000 psi, 5000 psi, and 4 digit ranges 112.5% full scale out-of-
range display: 1– – – or I –.–.–.–
4 X sensor burst pressure rating, or 10,000 psi, whichever is less
Vacuum service: 15 psia, ±15 psig, 15 psig, 30 psia,
100 psig, 100 psia, 200 psig sensors
Under-range display (non-vacuum sensors): –Err
Environmental
Storage temperature:
–40 to 203°F (–40 to 95°C)
Operating temperature:
–4 to 185°F (–20 to 85°C)
Compensated temperature:
32 to 158°F (0 to 70°C)
F16AD
Options
—add to end of model number
HA
High accuracy, ±0.1% FS ±1 LSD.
Not available with 3 psi, 5 psi, bipolar, or vacuum sen-
sors. See table at left for availability.
PM
Panel mount, 4.1" x 4.1". Not avail. with NEMA models.
MC
Metal front cover. Not available with NEMA models.
CC
Moisture resistant circuit board conformal coating
TP
Top gauge port. Not available with NEMA models.
Accessories
—order separately
WMPSK
Wall mount power supply kit, 115 VAC/12 VDC
RB
Protective rubber boot. Not avail. with NEMA models.
CD
Calibration data; 5 test points and date
NC
NIST traceability documentation, 5 points and date
F16ADN
psi = PSI
inHg = INHG
oz/in
2
= ZIN
inH
2
O = INH2O
ftH
2
O = FTH2O
mmHg = MMHG
torr = TORR
mmH
2
O = MMH2O
kg/cm
2
= KGCM
g/cm
2
= GCM
kPa = KPA
MPa = MPA
mbar = MBAR
bar = BAR
cmH
2
O = CMH2O
atm = ATM
G = gauge reference pressure
VAC = gauge reference vacuum
A = absolute reference
If vacuum gauge requires a minus sign, please specify.
The range code indicates the gauge’s default range.
Engineering
units may be changed to any of those listed under the same sensor
range. The listed ranges are rounded off.
Range
—see table at left
H H H H H H
H H H H H
H H H H H H
H H H H H
H H H H H H
H H H H H
H H H H H H
H H H H H
H H H H H H
Made in USA
Sensor Ranges and Engineering Units
‡ -HA option not available. Consult factory for special units.
3 psig
‡
Res 15 psig vac
‡
Res
30 psia
Res
–15V100psig
‡
Res
300 psig
Res
3PSIG
.001
100KPAVAC
.1
2KGCMA
.001
–15V100PSIG
.1
300PSIG
.1
6INHGG
.001
0.1MPAVAC
.0001
2ATMA
.001
–30INHG/100PSIG
.1
610INHGG
.1
85INH2OG
.1
1BARVAC
.001
30 psig
Res
–30V200INHGG
.1
4800ZING
1
50ZING
.01
1KGCMVAC
.001
30PSIG
.01
–400V2770INH2OG
1
700FTH2O
.1
210GCMG
.1
1ATMVAC
.001
60INHGG
.01
–240V1600ZING
1
2000KPAG
1
150MMHGG
.1
15 psig
Res
850INH2OG
1
–760V5200MMHGG
1
2MPAG
.001
150TORRG
.1
15PSIG
.01
480ZING
.1
–760V5200TORRG
1
20BARG
.01
200MBARG
.1
30INHGG
.01
2100GCMG
1
–100V700KPAG
1
20KGCMG
.01
200CMH2OG
.1
400INH2OG
.1
1600MMHGG
1
–0.1V0.7MPAG
.001
20ATMG
.01
2000MMH2OG
1
240ZING
.1
1600TORRG
1
–1V7BARG
.01
500 psig
Res
7FTH2O
.001
1000GCMG
1
2000MBARG
1
–1V7KGCMG
.01
500PSIG
.1
20KPAG
.01
760MMHGG
.1
2100CMH2OG
1
–1V7ATMG
.01
1020INHGG
1
5 psig
‡
Res
760TORRG
.1
70FTH2O
.01
100 psig
Res
1150FTH2O
1
5PSIG
.001
1000MBARG
1
200KPAG
.1
100PSIG
.1
3500KPAG
1
10INHGG
.01
1000CMH2OG
1
0.2MPAG
.0001
200INHGG
.1
3.5MPAG
.001
140INH2OG
.1
35FTH2O
.01
2BARG
.001
2770INH2OG
1
35BARG
.01
80ZING
.1
100KPAG
.1
2KGCMG
.001
1600ZING
1
35KGCMG
.01
350GCMG
.1
0.1MPAG
.0001
2ATMG
.001
7000GCMG
1
35ATMG
.01
260MMHGG
.1
1BARG
.001
60 psig
Res
5200MMHGG
1
1000 psig
Res
260TORRG
.1
1KGCMG
.001
60PSIG
.01
5200TORRG
1
1000PSIG
1
350MBARG
.1
1ATMG
.001
120INHGG
.1
7000MBARG
1
2040INHGG
1
350CMH2OG
.1
±15 psig
‡
Res
1660INH2OG
1
7000CMH2OG
1
2300FTH2O
1
3500MMH2OG
1
±15PSIG
.01
960ZING
1
230FTH2O
.1
7000KPAG
1
12FTH2O
.01
–30INHG/15PSIG
.01
4200GCMG
1
700KPAG
.1
7MPAG
.001
35KPAG
.01
±30INHGG
.01
3100MMHGG
1
0.7MPAG
.0001
70BARG
.01
15 psia
Res
±400INH2OG
1
3100TORRG
1
7BARG
.001
70KGCMG
.01
15PSIA
.01
±240ZING
.1
4100MBARG
1
7KGCMG
.001
70ATMG
.01
30INHGA
.01
±1000GCMG
1
4200CMH2OG
1
7ATMG
.001
2000 psig
Res
400INH2OA
.1
±760MMHGG
1
140FTH2O
.1
–15V200 psig
‡
Res
2000PSIG
1
240ZINA
.1
±760TORRG
1
400KPAG
.1
–15V200PSIG
.1
4070INHGG
1
1000GCMA
1
±1000MBARG
1
0.4MPAG
.0001
–30INHG/200PSIG
.1
4600FTH2O
1
760MMHGA
.1
±1000CMH2OG
1
4BARG
.001
–30V400INHGG
.1
14MPAG
.01
760TORRA
.1
±100KPAG
.1
4KGCMG
.001
–400V5500INH2OG
1
140BARG
.1
1000MBARA
1
±0.1MPAG
.0001
4ATMG
.001
–240V3200ZING
1
140KGCMG
.1
1000CMH2OA
1
±1BARG
.001
100 psia
Res
–100V1400KPAG
1
140ATMG
.1
100KPAA
.1
±1KGCMG
.001
100PSIA
.1
–0.1V1.4MPAG
.001
3000 psig
Res
0.1MPAA
.0001
±1ATMG
.001
200INHGA
.1
–1V14BARG
.01
3000PSIG
1
1BARA
.001
30 psia
Res
2770INH2OA
1
–1V14KGCMG
.01
6100INHGG
1
1KGCMA
.001
30PSIA
.01
1600ZINA
1
–1V 14ATMG
.01
6900FTH2O
1
1ATMA
.001
60INHGA
.01
7000GCMA
1
200 psig
Res
20MPAG
.01
15 psig vac
‡
Res
850INH2OA
1
5200MMHGA
1
200PSIG
.1
200BARG
.1
15PSIVAC
.01
480ZINA
.1
5200TORRA
1
400INHGG
.1
200KGCMG
.1
30INHGVAC
.01
2100GCMA
1
7000MBARA
1
5500INH2OG
1
200ATMG
.1
400INH2OVAC
.1
1600MMHGA
1
7000CMH2OA
1
3200ZING
1
5000 psig
Res
240ZINVAC
.1
1600TORRA
1
700KPAA
.1
480FTH2O
.1
5000PSIG
1
1000GCMVAC
1
2000MBARA
1
0.7MPAA
.0001
1400KPAG
1
35MPAG
.01
760MMHGVAC
.1
2100CMH2OA
1
7BARA
.001
1.4MPAG
.001
350BARG
.1
760TORRVAC
.1
200KPAA
.1
7KGCMA
.001
14BARG
.01
350KGCMG
.1
1000MBARVAC
1
0.2MPAA
.0001
7ATMA
.001
14KGCMG
.01
340ATMG
.1
1000CMH2OVAC
1
2BARA
.001
14ATMG
.01
Quick Link
cecomp.com/ad
NEMA 4X
Housing
SCR14SS
Filter screen fitting keeps debris out of gauge
sensor. Use for food vacuum packaging applica-
tions. 303 SS body, 100 micron 304 SS screen.
© 08-18
cecomp.com
1220 American Way Libertyville, IL 60048
800-942-0315
CECOMP
Div. of
A
BSOLUTE
P
ROCESS
I
NSTRUMENTS
