Absen AI BOX 410, User Manual

Page: 12 / 69

Schematic diagram of the control box connection
2.4 Use the Ai box 410 control box to debug the LED display
screen
Step 1 can be connected to the computer through the USB Mini interface or through the network port.
Mode 1: USB connection, connect to the upper computer through the Mini USB port on the AI Box 400.
Method 2: network port connection, through the AI BOX 400 network port.
(The default IP of the control box is 192.168.0.10 when configuring the computer IP. AI BOX400 Control
box supports network port backup, does not support device backup)
1. Connect the upper computer computer through the network port;
2. Right-click the lower right corner of the desktop to open the Network and Sharing Center.
3. Select Local Connection> Properties> Internet Protocol Version (4 TCP / IPv4), to enter the
configuration IP interface.
4. Click "Use the IP address below" to configure the computer IP to the 192.168.0.2~192.168.0.254 network segment,
and click OK.
AI BOX410
Control box