Add:
1501 Industrial Way N, Toms River, NJ 08755
Phone:
866-222-8866
E-mail:
Web:
www.AboveAllLighting.com ©2016 ABOVE ALL Lighting, Inc. All rights reserved
2
LED V-LINE FLOOD LIGHT
Instructions Manual
TRUNNION MOUNT DRILL PATTERN
1. Turn off the power.
2. Connect wires as above wiring diagram.
3.
Knuckle into the pole by thread. Secure the fixture with
nut on the pole. Make necessary waterproof for thread.
4.
Loosen the locking bolt and swivel fixture to a desired
angle.
5. Tighten the locking bolt.
KNUCKLE MOUNT (KN)
1.
The slipfitter fits a 2-3/8’’ O.D. Tenon. Make
necessary wire connections in the slipfitter and knot
wires for strain relief.
2.
Place the slipfitter over a tenon or pole and secure
the fixture with (2) Set Screws on the side of the
Slipfitter.
3.
Remove the Slipfitter Cover Plate by removing (2)
screws on it. Then loosen the Locking Bolt and
swivel fixture to a desired angle. Via the scale mark in
the slipfitter.
4.
Tighten the Locking Bolt and replace the Slipfitter
Cover Plate with removed (2) screws.
SLIPFITTER MOUNT (SF)
Ref#:1
1214-10315
Figure. 1
