Smoke Detector GUI user guide
3. How to use Smoke Detector GUI Program
11
3.2.3
Stop
This button is used to allow the Target H/W to stop sampling.
Table 3. Stop Button
This button is disabled if the Target H/W is not connected.
This button is disabled while the Program is not operating.
It is automatically enabled only when the Program is operating.
When clicking on this button, the Target H/W stops sampling.
When the Target H/W stops sampling, the collected data can be stored.
3.2.4
Save data
This button is used to store the sampling data.
Table 4. Save Button
This button is disabled if there is no sampled data.
This button can be disabled even during sampling.
It is automatically enabled if sampled data exists.
When clicking on this button, the sampled data is stored as a CSV type file
in a storage device of the PC.
A CSV (Comma Separated Values) type file is a data file that consists of text in which multiple fields
are separated by commas (,). It can be read using a normal text editor, but when it is read using an
Excel program, each field is more clearly distinguished, making it easy to read and manage.
3.2.5
Program termination
To exit the Program,
click the ‘X’ button in the upper right corner of the dialog box.
The Program execution information at the time when the Program is terminated, such as the number of
Slave channels and sampling intervals, is automatically stored, so the Program can start with those
values at the next execution.
Sampled data are not automatically stored.
