-
32 -
BSSID
: The MAC address of the connected AP. Fixed
and cannot be changed.
Authentication Type
: The authentication type support
Open, WPA-PSK and WPA2-PSK.
Encryption Type:
For
Open
authentication mode, the
selection of encryption type are
NONE
and
WEP
. For
WPA-PSK
and
WPA2-PSK
authentication mode, the
encryption type supports both
TKIP
and
AES
.
Key Length:
Only valid when using
Open
authentication
mode and
WEP
encryption. There are key lengths 5, 10,
13 and 26.
Key Index:
Only valid when using
Open
authentication
mode and
WEP
encryption. There are 1~4 key index.
Key Material:
The key material can be used to ensure the
security of your wireless network. Fill in the appropriate
value or phrase in
Key Material
field.
Show Password
: Check this box to show the passwords
that have been entered.
OK
: Click to save and apply the new settings.
Cancel
: Click to leave and discard the settings.
Connect
Command to connect to the selected network inside
credentials. The active selected credential is as like as the
active selected Profile.
Rotate
Command to rotate to connect to the next network inside
credentials.
Disconnect
Stop WPS action and disconnect this active link. And
then select the last profile at the Profile Page. If there is
an empty profile page, the driver will select any
non-security AP.
Export Profile
Export all credentials to Profile.