Windows 2000 Installation
1. Connect the rectangular end of the USB cable
into the USB host port of your computer, and
the square end into the USB port of your
network adapter. Windows 2000 will
automatically detect the device. Click
Next
to continue.
2. Select
Search for a suitable driver for my
device (recommended)
and click
Next.
3. Select
Specify a location
and click
Next.
4. Insert the device driver into your CD-ROM
drive. Click
Browse,
direct Windows 2000
to the location where the driver stored and
click
OK.
5. Click
Next.
Windows 2000 will start
copying necessary files onto your system.
6. Click
Finish
to complete the software
installation.
7. To verify if your network adapter exists in
your computer and well enabled, you can
perform the following steps.
8. Go to
Start, Settings, Control Panel,
Hardware
and then
Device Manager.
9. Click
Intelligent ISDN Drivers
and
Network
adapters
to expand. If
Intelligent CAPI 2.0
driver, Intelligent USB adapter
and
Intelligent ISDN WAN miniport
are found,
that means your network adapter exists and
enabled. If not, consult your distributor for
technical support.
- 7 -