TC08
8 Port 10BASE-T Ethernet Hub
Introduction
The 8 port 10Base-T Ethernet Hub is designed for
plug-and-play installation and easy management. The
hub provides an Uplink connection via a RJ-45
connector, which makes it easy to expand an existing
network. The hub features LINK/ACT LEDs to
show the connection and receiving/transmitting
status of each port. POWER and COL LEDs show the status of the hub.
Features
Compliant to IEEE 802.3 10BASE-T/2
standard
Automatic partitioning function of each
port to isolate network failure
Ethernet connections supported Category 3
twisted-pair cabling or better
LED indicators for each twisted pair port
for linking and receiving diagnosis
Uplink port for easy linking of more hubs
to further expand the network
Compact design in palm size
The hub’s housing made by metal material
Specifications
Comply IEEE 802.3 (10BASE-T)
standards
CSMA/CD protocol for complete data
integrity
Plug-and-Play installation
Cost effective, unmanaged hub allowing
interconnection of thin and STP/UTP
segments within a single device
Automatic partitioning of faulty ports
Compact palm size, light weight design
Uplink port via straight-through cable
Power-on self-testing LED Indication
Status LED interface for easy maintenance
Maximum On-Board
620mA@+2.5V(1.55W)