Abocom 802.11b/g 2.0 WUG2660, User Manual, Page: 23 / 35

-
20 -
Default Key ID
：
You can set your default key ID at #1~#4.
Key Format
：
Select Hexadecimal if you are using hexadecimal
numbers ( 0-9, or A-F ).
Select ASCII if you are using ASCII characters
( case-sensitive ).
10 hexadecimal digits or 5 ASCII characters are needed if
64-bit WEP is used; 26 hexadecimal digits or 13 ASCII
characters are needed if 128-bitWEP is used
；
58 hexadecimal
digits or 29 ASCII characters are needed if 256-bitWEP is
used.
Key Value:
#1~#4
This setting is the configuration key used in accessing
the wireless network via WEP encryption. You can specify up to
4 different keys to
encrypt or decrypt wireless data.
□
The Key is provided via 802.1x authentication
：
Please query your network manager about the currently used
security protocol, if 802.1x authentication is currently used, then
you can check this item to enable 802.1x security protocol. The
key value will be configured automatically, just click
Apply to
take effect.
WPA Encryption Setting
Protocol
：
This panel enables you to select an authentication
protocol.
User Name
：
Type in the user name assigned to the certificate.
Password
：
This panel is available when EAP-TLS is not selected
(either MSCHAP V2 over PEAP is selected with WEP or LEAP
is selected for CCX). This panel enables you to enter a login
name and password or request that the driver prompt for them
when you connect to a network.
Passphrase
：
Enter the key that you are sharing with the network
for the WLAN connection.
Key Format
：
Select Hex if you are using hexadecimal numbers
( 0-9, or A-F ).
Select ASCII if you are using ASCII characters.