|
Additional technical information
iv
Additional technical information
Additional technical information is required to install an eMH1, eMH2 or eMH3 Wallbox on a POLEMHx mounting
pole, as well as regarding further accessories. It is contained in separate documents.
In addition, the technical data for your mounting pole are collated in product-specific data sheets. You can download
these documents from the ABL website using the following link:
https://www.ablmobility.de/en/service/downloads.php
NOTE
Displaying the additional information on a computer, tablet or smartphone
Additional technical information is made available in the Portable Document Format (PDF).
To display PDF files, you need the free Adobe Acrobat Reader or comparable software.
You can find further information about our product range, as well as about separately available accessory compo-
. Please visit:
Intended use
The POLEMHx mounting poles are used to install a corresponding eMH1, eMH2 or eMH3 Wallbox outdoors. In order
to ensure the necessary stability, the POLEMHx can be installed on the optionally available EMH9999 concrete foun-
dation or on a self-constructed concrete foundation. To protect the installed wallbox from the weather, ABL offers
the compatible WPR12 (POLEMH1/2) and WPR36 (POLEMH3) weather shield. For cable management at the charging
point, the CABHOLD cable holder with charging plug receptacle can retrofitted.
Information in this document
This document describes the installation of the POLEMHx on the EMH9999 foundation as well as the subsequent me-
chanical installation and electrical connection of a wallbox to the mounting pole: It is recommended that all working
steps described in this document are carried out by qualified specialist electrical contractors only.
User
Specialist electrical contractor
Installation manual (this document)
Additional technical information
Data sheets
Installation instructions WPR12/36
Installation instructions CABHOLD
