| Installation of the Wallbox eM4 Twin
28
NOTE
Recommended cable lengths for wiring in the wallbox
ABL recommends the following cable lengths to ensure problem-free connection in the wallbox:
Power line: at least 130 mm
Data cable: at least 170 mm
Control cable: at least 130 mm
2
Using the spirit level, align the drilling template lev-
el and plumb on the mounting surface.
3
With the pencil, mark the fixing points in the
mounting position.
4
Pre-drill the marked fixing points with the electric
drill and drill bit ( 8 mm).
ø 8,0 mm
65 mm
5
Drive the wall plugs into the fixing points with the
hammer.
6
Screw the mounting rail into the two upper mount-
ing points using the two TX30 plug screws and the
Torx screwdriver.