Abit IT5E Series, User Manual

Page: 16 / 98

2-4 Chapter 2
The
“
keylock switch
”
is used to lock the computer
’
s
keyboard. This disables the keyboard so that
unauthorized persons cannot use it. When this function
is in use, you will need to use the unlock key to activate
the keyboard.
PN1 - IDE LED connector
This connector has a specific orientation. Connect the two-thread IDE
LED connector cable attached to the case to the IDE LED connector on
the mainboard.
Pin number Name or significance of signal
7 LED
’
s Cathode
8 LED
’
s Anode
PN1 - Standby connector
There is no specific orientation. Most of the present AT cases do not
support this feature so most of you can ignore this instruction. If your
case has a cable for the Standby feature, you should connect this cable to
the connector on the Mainboard.
Pin number Name or significance of signal
10 Standby power supply<+5VSB>
11 Control signal of computer switch of the case
The
“
standby connector,
”
unlike the traditional mechanical
switch, is an electronic way to turn the computer
’
s power
off. To use this feature, the power supply system must
permit a shutdown power supply (+5VSB), support the
electronic switch feature, and must also be used with
connector JS1 on the mainboard. For example, when
using Windows 95, your computer will automatically shut
down after having saved your work when you exit
Windows. You do not need to use the mechanical
switch to turn the computer off.
PN1 - Hardware Suspend switch
Computer
Knowledge
Computer
knowledge