BIOS Setup
4-19
FDD, COM, LPT Port:
Two options are available: Enabled and Disabled. Default setting is
Disabled
. If any floppy disk, COM ports and Parallel port I/O activity occurs, it will cause the
computer to re-count the time elapsed.
PCI PIRQ[A-H]#:
Two options are available: Enabled and Disabled. Default setting is
Disabled
. If any INTA~INTD signal activity occurs, it will cause the computer to re-count the
time elapsed.
PWR ON After PWR-Fail:
This setting lets you set the system action after a power failure.
4-7. PnP/PCI
Configurations
This section describes configuring the PCI bus system. PCI, or
P
ersonal
C
omputer
I
nterconnect, is a system which allows I/O devices to operate at speeds nearing the speed the
CPU itself uses when communicating with its own special components. This section covers
some very technical items and it is strongly recommended that only experienced users should
make any changes to the default settings.
Figure 4-9. PnP/PCI Configurations Setup Screen Shot
Resources Controlled By:
Two options are available: Auto(ESCD) and Manual. Default setting is
Auto(ESCD)
. When
the setting is Auto(ESCD), the
IRQ Resources
and
Memory Resources
can not be changed.
When resources are controlled manually, the
IRQ Resources
and
Memory Resources
can then
be changed.
PCI
PnP
devices compliant with the Plug and Play standard, whether designed for the PCI
bus architecture.
The Award Plug and Play BIOS has the capability to automatically configure all of the boot
and Plug and Play compatible devices. If you select
Auto (ESCD)
, the IRQ Resources item
will be disabled, as the BIOS automatically assigns them. But if you have trouble in assigning
the interrupt resources automatically, you can select
Manual
to set which IRQ is assigned to
PCI PnP cards.
User’s Manual
Summary of Contents for BG-71
