Abit AB-AT7-MAX2, Manual, Page: 73 / 136

Introducing the BIOS
User’s Manual
4-19
AGP Driving Value:
This item allows you to adjust the AGP driving force. You can key in the HEX number into this
section. The minimum number is 0000, and maximum number is 00FF.
AGP Fast Write:
Two options are available: Disabled or Enabled. The default setting is Disabled . If your AGP adapter can
support this function, then you can choose Enabled . Otherwise, choose Disabled .
AGP Master 1 WS Write:
Two options are available: Disabled or Enabled. The default setting is Disabled . This implements a single
delay when writing to the AGP Bus. When you set it to Enabled , two-wait states are used by the system,
allowing for greater stability.
AGP Master 1 WS Read:
Two options are available: Disabled or Enabled. The default setting is Disabled . This implements a single
delay when reading to the AGP Bus. When you set it to Enabled , two-wait states are used by the system,
allowing for greater stability.
CPU & PCI Bus Control:
This item can let you sets several items concerning the PCI parameters. If you do not understand what
each item does, please keep the default settings as well. Wrong settings will cause system unstablity.
Figure 3-5E. CPU & PCI Bus Control Screen