Abit AB-AT7-MAX2, Manual, Page: 115 / 136

USB 2.0 Drivers Installation for Windows
®
2000
User’s Manual
D-1
Appendix D. USB 2.0 Drivers Installation for
Windows
®
2000
After you’ve installed VIA 4 in 1 drivers, you will need to install the USB 2.0 drivers. Step by step
instructions on how to do this are found in the following section.
Note
Details of the Windows
®
2000 operating system will not be mentioned in this manual. If you have any
problems with Windows
®
2000 installation, operations, or settings, please refer to your Windows
®
2000 user's manual or other databases provided by Microsoft
®
Corporation.
Insert the AT7 series CD into your CD-ROM drive, and it should execute the program automatically. If
not, you can go to the CD location and execute the execution file at the main directory of the CD. After it
has been executed you will see the screen below.
Step 1: Move the cursor to “ USB 2.0 Driver ”
and click on it. You will go to the next screen.
Step 2:
The “
InstallShield Wizard
” shows up,
and it will go to the next screen for a while.
Step 3: You will now see the welcome screen
and its dialogue box. Click “ Next> ” to go on.
Step 4: Please select “Install USB Driver”, and
click the “ Next> ” button to continue.