Abilia Gewa Control 18, Manual, Page: 30 / 60

30
Copying a button
Using your Control 18
, it is possible to copy a buttons’ function to another button.
NOTE! The code/channel remains in its original place.
1. Choose level and press the button
X
with the code to be copied.
2. Choose the level to which you want to copy the code.
3. Press
P
and
8
at the same time. The indication lamp for button 8 and the current level
are now lit.
4. Press the button
Y
to which you want to copy the code.
5. The indication lamp for the Level -button flashes green to show that the operation is
complete.
Copying a button
Copying code/channel from button
X
to button
Y
:
Choose level, choose
X
, choose level,
P
+
8
, choose
Y
.
Setting Beep Volume
Control 18 has a beep signal which sounds when a button is pressed. Set the beep volume
in 10 stages (1 - 9).
0
= no sound at all and
9
= maximum sound level.
Do as follows:
1. Press
P
and
4
at the same time. The indication lamp for button 4 and the current level
are now lit.
2. Press a button from
0
-
9
to choose beep volume.
3. The indication lamp for the Level -button flashes green to show that the operation is
complete.
Setting Beep Volume
Press
P
+
4
, choose the setting .
0
= no sound at all and
9
= maximum sound level.
Default setting: Beep Volume = 4 (0
– 9)