Personalise GEWA Connect
17
Buttons
A button can send a signal for an environmental control function or go to
another page. A button consists of a command, a name and a symbol. Create
buttons on the related pages. For example, all buttons for environmental
control in the bedroom should be created on the page "Bedroom". A created
button cannot be moved to another page, but the same page can be
referenced from more than one button by creating a page link.
To create a new page
A
1.
Tap "Options" (A) and select "Switch to Edit
Mode".
2.
Tap the button "New object".
3.
Tap the button "Select symbol" to open a list of all
available symbols. Tap a symbol to select it.
NOTE:
It is possible to upload images at
and use them
instead of symbols. It is only possible to add pictures to the buttons on
4.
Tap "Name" and enter a name for the page, for example "Bedroom" or
"TV".
NOTE:
To write by voice, press:
NOTE:
You must select a symbol or a name, but it is not necessary to
have both.
5.
Optional: Tap the button "Change colour" and select background colour
and colour of the symbol and text. Tap "Back" to cancel. Tap "Save" to
confirm.
6.
Optional: Tap the button "Record a sound" and record a scanning sound.
Refer to
on page 24. Tap "Back" to cancel. Tap "Save"
to confirm.
7.
Tap the down arrow to the right of “IR item” and select “Page” in the list.
8.
Dynamic page layout is selected by default. In a dynamic layout, the size
and position of the buttons change depending of the number of buttons.
Tap the down arrow to the right of “Dynamic” to select a different page
layout.
9.
Tap the button "Save" to save the page.
Summary of Contents for GEWA Connect
Page 1: ...GEWA Connect Art nr 461180 461188 EN 7 0 User manual...
Page 2: ......