EN - 54
13 Diagnosis
MFS service software
Description
Screenshot
Possible causes
Control lead not connected
Control lead defective
Signals lost along the entire signal flow
Switch/button faulty
Connector in the eBOX not correctly inserted
eBOX multibus IO printed circuit board faulty
Description
Screenshot
Check the measuring wheel in the event of a nonconformity
This message is displayed if a test is
unsuccessful.
Possible causes
Measuring wheel not moved within the timeout period
Control lead not connected
Control lead defective
Actual value encoder signals lost along the entire signal flow
Actual value encoder defective
Connector in the eBOX not correctly inserted
eBOX multibus IO printed circuit board faulty
Testing the inputs/outputs
By pressing or switching the
applicable elements, the correct
function is displayed through
incremental values and signalling.
If the test is not successful, no green
status indicator appears.
Possible causes
Control lead not connected
Control lead defective
Signals lost along the entire signal flow
Switch/button faulty
Connector in the eBOX not correctly inserted
eBOX multibus IO printed circuit board faulty