EN - 12
BAL.0030 • 2019-01-18
7 Transport and installation
BRS-LC
7.3 Fastening the prism
1
Insert the prism
into the clamping device
from above.
2
Screw in the cylinder head screw
7.4 Setting up the clamping position
See also Fig. 4 Putting into operation on page EN-11
1
Move the torch with the gas nozzle
vertically to the tool axis (reamer axis) over the
BRS-LC
P1 Fig. 4).
2
Approach the clamping position P2 (Fig. 4). Make sure that the cylindrical part of the gas nozzle
lies evenly against
7.5 Mounting the reamer
1
Clamping device
2
Prism
3
Cylinder head screw
Fig. 5
Fastening the prism
1
2
3
1
Gas nozzle
2
Prism
3
Maintenance station BRS-LC
Fig. 6
Setting up the clamping position
1
2
3
1
Clamping device
2
R
eamer
3
Tool
Fig. 7
Mounting the reamer
1
2
3