Abicor Binzel ABICOOLER 1300, Operating Instructions Manual

Page: 7 / 24

ABICOOLER 1300 4 Product description
EN - 7
4 Product description
4.1 Assembly and use
The device is used for cooling liquid-cooled welding torches. The device supplies and monitors the coolant.
All required components and connections have been installed in the housing. The coolant is pumped via
a closed cooling circuit through the welding torch and cooled down via an integrated air heat exchanger.
We recommend the use of a coolant filter as well. A flow control is integrated as standard in the device,
however, it must be connected via the supplied flow control line.

6.2.3 Commissioning the flow control on page EN - 12

13.1 Connecting diagram for flow control on page EN - 19
Fig. 2 Assembly and use
A
Control lead connection for flow control
B Coolant filler neck
C
On/off switch
D ABICOOLER 1300 cooling unit
E
Fuse
F
Coolant supply (blue-colored quick coupling)
G Coolant return (red-colored quick coupling)
H
Drain coupling
I Coolant tank
J
Filling level indication
Fig. 3
Overview of the coolant circuit
A Heat exchanger
B Coolant return (red)
C Coolant supply (blue)
D Drain coupling
E Pump
F Coolant tank
A B C D
E
F G H I J
A
B
C
D
E F