ABICAR ADVANCED 42V
5 Transport and positioning
EN
-
13
5 Transport and positioning
► Convey the device to the desired work area using its handle.
► Ensure clear access to the control elements and connections.
► To ensure a clean weld seam, ensure that the surface is clean and flat.
Adjustment range of guide arm
0 to 100 mm
Horizontal speed
0 to 110 cm/min
Vertical speed
0 to 100 cm/min
Weight
8 kg
Tab. 2
Ambient conditions, transport, storage and operation
Ambient temperature
(operation, storage in a closed environment)
−10°C to +40°C
Ambient temperature (transport)
−25°C to +55°C
Relative humidity
Up to 90% at +20°C
Tab. 1
General information
WARNING
Risk of injury resulting from improper transportation and positioning
In the event of improper transportation and positioning, the device could topple over or fall. This may
result in serious injuries.
► Check and wear your personal protective equipment.
► Place the device on a suitable base (flat, solid, dry) on which it will not topple over.
► Note the weight of the device when lifting it.
► Avoid abrupt lifting and setting down.
► Do not lift the device over persons or other devices.
NOTICE
Material damage resulting from improper transportation and positioning
Weather conditions can cause irreparable damage to the device.
► Protect the device against weather conditions, such as rain and direct sunlight.