User Operations Guide—Mira Instant Replay Server
278
Copyright ©2014, Abekas Incorporated
Revised: 5 September 2014
Define, Save & Load Clip: Manually Mark IN & OUT
This procedure has the operator mark the desired IN and OUT points for the clip, saving the clip in the next open Clip Register of the
current Bank—with one additional button press. The clip is then loaded, ready for replay, with a final button press.
This procedure marks the desired OUT point first; rewinds the video to the desired IN point, then marks the IN point. This is more time-
efficient when you want to manually mark both the IN and OUT points.
1.
Tap desired OUTPUT CONTROL button
for PGM channel you want to control.
The
button is tapped in this example;
Button glows green, corresponding to the
“
Green
”
PGM-2
output video channel.
The frame surrounding the active PGM channel
is highlighted in the display monitor.
2.
Tap
button in LIVE EE group.
is activated on
PGM-1
.
3.
Wait for action you’d like to save & replay.
4.
When something interesting happens,
wait for
end
of action sequence…
5.
Then tap
button.
OUT
point is set:
button briefly glows RED.
5
Continued on next page…
1
2
Summary of Contents for Mira
Page 382: ......
