manualshive.com logo in svg

Abekas AirCleaner, User Manual

Share
Download
Abekas AirCleaner User Manual Download Page 34

24

AirCleaner

  •  

User Guide

3. Removing AirCleaner Top Cover

Removing AirCleaner Top Cover

Removing AirCleaner Top Cover

If the top cover of the AirCleaner chassis must be removed for purposes of servicing 
the machine, please follow this procedure:

1. Remove the AirCleaner chassis from the rack (if so mounted) and place the 

chassis on a static-free work surface.

2. Remove the (4) philips-head screws from the REAR EDGE of the top cover.

3. SLIDE top cover towards REAR of chassis.

4. Top cover can now be lifted and removed.

Figure 3-1.  AirCleaner Chassis Interior

WARNING

AirCleaner uses open-module power supplies with:

UNUSUALLY HIGH CURRENT

 and 

VOLTAGES!

The power supplies should NEVER have external AC power
connected when the chassis top cover is removed.

Risk of DEADLY electrical shock is EXTREMELY HIGH!

Always remove all AC power from main chassis BEFORE removing
the chassis top cover. For units fitted with the redundant power
supply option, be sure to remove BOTH AC power cords.

Summary of Contents for AirCleaner











































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands